Kaye-Dee Marking Solutions provide an extensive range of consumables for the
complete printing package. These include a wide range of machine accessories 
and spares together with mixing cups, viscospatulas, pads, start up kits, nylo
plate making kits, WG701 cleaning equipment and copyjet film systems.

Pads

Teca-Print pads are supplied in 3 shore hardness' and graded by colours for
recognition;

GREEN - SOFT 

RED - MEDIUM 

BLUE - HARD 

As a general rule, the harder the pad, the better the print, however, due to the
varying substrates and texture of substrate, it maybe the case that the hardest
pad does not produce the best print transfer and therefore a softer pad must
be used. 

Examples: a hard pad would be used to print onto textured surfaces. A softer 
pad would be used to print onto a cylinder. 

StarX Pads

The StarX pads are antistatic and swell-resistant properties, this allows 
a perfect ink transfer, practically no ink splashes on the edges of the 
image or ink remaining on the pad, even when working with changing 
printing images.

StarX pads possess a high mechanical resistance and enable longer pad 
lifespan, even when printing on textured surfaces or even sharp edges
of the printing part. They are extremely user friendly and ready to use
immediately without a long activation.

WG701 Cleaning Equipment


The cleaning equipment is made of stainless steel with a glass lid 
and solvent-resistant gloves.
1. Overall dimensions (width/height/depth): 790 mm/ 1310 mm/ 590 mm
2. Cleaning space dimensions (width/height/depth): 690 mm/ 380 mm/ 450 mm
3. Cleaning space volume: 20 litres
4. Pump drive: 5 - 6 bar
5. Suction removal: via 1” connection piece
6. Weight: 60 kg
7. Compressed-air supply: minimum 4 bar, maximum 8 bar
8. Automatic suction: available on request
Only cleaning liquids with a flash point above 30°C are permitted! 

Exposure Unit and Drying Cabinet


Exposure Unit and Drying Cabinet BG & TS 

BG 25/30    TS 25/30 
BG 35/50    TS 35/50 
BG 35/100   TS 35/100 

Coordinate Tables MG and KT


Coordinate Tables MG0, KT50, KT30 and KT10 have adjustable X, Y 
and Z-axis and rotate a full 360 degrees.

Machine Servicing

        
We employ a full-time service engineer who is fully conversant with all
aspects of machine design and construction.

This is accompanied by a comprehensive stock of electrical, pneumatic and 
mechancial spares out in the field. With over 25 years of experience of 
Teca-Print machinery, our service department has a team that really know
the meaning of service. Service contracts can be quoted on request, 
please contact Gary Fisher on 07817015074.